DELL 9.8(0.0) User Manual
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.5(0.0)
Added support for the ipv6 and ip-any options on the
Z9000, S6000, S4820T, S4810, MXL.
Z9000, S6000, S4820T, S4810, MXL.
9.2(1.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
Usage
Information
Information
To access this command, enter the class-map command. After the class map is
identified, you can configure the match criteria.
identified, you can configure the match criteria.
The match ip precedence command and the match ip dscp command are
mutually exclusive.
mutually exclusive.
Up to eight precedence values can be matched in one match statement. For
example, to indicate the IP precedence values 0 1 2 3, enter either the match ip
precedence 0-3 or match ip precedence 0,1,2,3 command.
example, to indicate the IP precedence values 0 1 2 3, enter either the match ip
precedence 0-3 or match ip precedence 0,1,2,3 command.
NOTE: Only one of the IP precedence values must be a successful match
criterion, not all of the specified IP precedence values must match.
criterion, not all of the specified IP precedence values must match.
Related
Commands
Commands
match mac access-group
Configure a match criterion for a class map, based on the contents of the designated MAC ACL.
S4820T
Syntax
match mac access-group {mac-acl-name}
Parameters
mac-acl-name
Enter a MAC ACL name. Its contents is used as the match
criteria in the class map.
criteria in the class map.
Defaults
none
Command
Modes
Modes
CLASS-MAP
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1474
Quality of Service (QoS)