DELL 9.8(0.0) User Manual
default-information originate
Generate a default route for the RIP traffic.
S4820T
Syntax
default-information originate [always] [metric metric-value]
[route-map map-name]
To return to the default values, use the no default-information originate
command.
[route-map map-name]
To return to the default values, use the no default-information originate
command.
Parameters
always
(OPTIONAL) Enter the keyword always to enable the switch
software to always advertise the default route.
software to always advertise the default route.
metric metric-
value
value
(OPTIONAL) Enter the keyword metric then a number as
the metric value. The range is from 1 to 16. The default is 1.
the metric value. The range is from 1 to 16. The default is 1.
route-map
map-name
map-name
(OPTIONAL) Enter the keywords route-map then the name
of a configured route-map.
of a configured route-map.
Defaults
Disabled. Metric: 1.
Command
Modes
Modes
ROUTER RIP
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.6.1.0
Introduced on the C-Series.
pre- 6.2.1.1
Introduced on the E-Series.
Usage
Information
Information
The default route must be present in the switch routing table for the default-
information originate command to take effect.
information originate command to take effect.
1514
Routing Information Protocol (RIP)