DELL 9.8(0.0) User Manual
Version
Description
7.6.1.0
Introduced on the C-Series.
pre- 6.2.1.1
Introduced on the E-Series.
Related
Commands
Commands
distribute-list out
Configure a filter for outgoing routing updates.
S4820T
Syntax
distribute-list prefix-list-name out [interface | bgp |
connected | isis |ospf | static]
To delete the filter, use the no distribute-list prefix-list-name out
command.
connected | isis |ospf | static]
To delete the filter, use the no distribute-list prefix-list-name out
command.
Parameters
prefix-list-
name
name
Enter the name of a configured prefix list.
interface
(OPTIONAL) Identifies the interface type slot/port as one of
the following:
the following:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
connected
(OPTIONAL) Enter the keyword connected to filter only
directly connected routes.
directly connected routes.
isis
(OPTIONAL) Enter the keyword isis to filter only IS-IS
routes.
routes.
ospf
(OPTIONAL) Enter the keyword ospf to filter all OSPF routes.
static
(OPTIONAL) Enter the keyword static to filter manually
configured routes.
configured routes.
Defaults
Not configured.
Routing Information Protocol (RIP)
1519