DELL 9.8(0.0) User Manual

metric metric-
value

(OPTIONAL) Enter the keyword metric then a number as 
the metric value. The range is from 0 to 16.

route-map 
map-name

(OPTIONAL) Enter the keywords route-map then the name 
of a configured route map.

Defaults

Not configured.

Command 
Modes

ROUTER RIP

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant FTOS Command Line Reference Guide.

The following is a list of the FTOS version history for this command.

Version

Description

8.3.19.0

Introduced on the S4820T.

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

pre- 6.2.1.1

Introduced on the E-Series.

redistribute ospf

Redistribute routing information from an OSPF process.

S4820T

Syntax

redistribute ospf process-id [match external {1 | 2} | match 
internal | metric metric-value] [route-map map-name]
To disable redistribution, use the no redistribute ospf process-id [match 
external {1 | 2} | match internal | metric metric-value] 
[route-map map-name] command.

Parameters

Enter a number that corresponds to the OSPF process ID to 
redistribute. The range is from 1 to 65355.

match external 
{1 | 2}

(OPTIONAL) Enter the keywords match external then the 
numbers 1 or 2 to indicated that external 1 routes or external 
2 routes should be redistributed.

match internal

(OPTIONAL) Enter the keywords match internal to 
indicate that internal routes should be redistributed.

1532

Routing Information Protocol (RIP)