DELL 9.8(0.0) User Manual
Version
Description
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre-6.2.1.1
Introduced on the E-Series.
Related
Commands
Commands
— names (or selects) a standard access list to filter based on
the IP address.
IP addresses or protocols.
enable password
Change the password for the enable command.
Syntax
enable password [level level] [encryption-type] password
To delete a password, use the no enable password [encryption-type]
password [level level] command.
To delete a password, use the no enable password [encryption-type]
password [level level] command.
Parameters
level level
(OPTIONAL) Enter the keyword level then a number as the
level of access. The range is from 1 to 15.
level of access. The range is from 1 to 15.
encryption-
type
type
(OPTIONAL) Enter the number 7 or 0 as the encryption type.
Enter a 7 then a text string as the hidden password. The text
string must be a password that was already encrypted by a
Dell Networking router.
string must be a password that was already encrypted by a
Dell Networking router.
Use this parameter only with a password that you copied
from the show running-config file of another Dell
Networking router.
from the show running-config file of another Dell
Networking router.
password
Enter a text string, up to 32 characters long, as the clear text
password.
password.
Defaults
No password is configured. level = 15.
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Security
1591