DELL 9.8(0.0) User Manual
RADIUS Commands
The following RADIUS commands are supported by Dell Networking OS.
aaa radius group
Configure the RADIUS server group that is used for Authentication, Authorization and Accounting.
Syntax
aaa radius group group-name
To remove the RADIUS group configuration, use the no aaa radius group
group-name command.
To remove the RADIUS group configuration, use the no aaa radius group
group-name command.
Parameters
group-name
Enter the name of the RADIUS server group.
Defaults
none
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.4.(0.0)
Introduced on the S-Series and Z-Series.
Usage
Information
Information
You can use this command to configure the group of Radius servers used for
Authentication, Authorization, and Accounting purposes.
Authentication, Authorization, and Accounting purposes.
If the RADIUS group is not configured for Authentication, Authorization, and
Accounting, then globally configured Radius servers are used for the purposes.
Accounting, then globally configured Radius servers are used for the purposes.
When the RADIUS group is removed, the AAA configuration is also removed.
Example
debug radius
View RADIUS transactions to assist with troubleshooting.
Syntax
debug radius
To disable debugging of RADIUS, use the no debug radius command.
To disable debugging of RADIUS, use the no debug radius command.
Security
1605