DELL 9.8(0.0) User Manual
dot1x supplicant-timeout
Configure the amount of time after which exchanges with the supplicant time-out.
Syntax
dot1x supplicant-timeout seconds
To return to the default, use theno dot1x supplicant-timeout command.
To return to the default, use theno dot1x supplicant-timeout command.
Parameters
seconds
Enter a time-out value in seconds. The range is from 1 to
300, where 300 is implementation dependant. The default is
30.
300, where 300 is implementation dependant. The default is
30.
Defaults
30 seconds
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the C-Series and S-Series.
7.4.1.0
Introduced on the E-Series.
dot1x tx-period
Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator PAE.
Syntax
dot1x tx-period seconds
To return to the default, use the no dot1x tx-period command.
To return to the default, use the no dot1x tx-period command.
Parameters
seconds
Enter the interval time, in seconds, that EAPOL PDUs are
transmitted. The range is from 1 to 65535 (1 year). The
default is 30.
transmitted. The range is from 1 to 65535 (1 year). The
default is 30.
Defaults
30 seconds
Security
1633