DELL 9.8(0.0) User Manual

Version

Description

7.6.1.0

Introduced on the C-Series.

6.2.1.1

Introduced on the E-Series.

Usage 
Information

This command changes the sampling rate for an interface. By default, the sampling 
rate of an interface is set to the same value as the current global default sampling 
rate. If the value entered is not a correct power of 2, the command generates an 
error message with the previous and next power-of-2 value. Select one of these 
two number and re-enter the command.

Related 
Commands

 — changes the sampling rate globally.

show sflow

Display the current sFlow configuration.

Syntax

show sflow [interface]

Parameters

(OPTIONAL) Enter the following keywords and slot/port or 
number information:

• For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE then the slot/port information.

• For a Loopback interface, enter the keyword loopback 

then a number from 0 to 16383.

• For the Management interface on the stack-unit, enter 

the keyword ManagementEthernet then the slot/port 

information. The slot range is from 0 to 1. The port range 

is 0.

• For a port channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

• For a 100/1000 Ethernet interface, enter the keyword 

GigabitEthernet then the slot/port information.

Command 
Modes

• EXEC
• EXEC Privilege

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

1690

sFlow