DELL 9.8(0.0) User Manual
snmp-server user (for AES128-CFB Encryption)
Specify that AES128-CFB encryption algorithm needs to be used for transmission of SNMP information.
The Advanced Encryption Standard (AES) Cipher Feedback (CFB) 128-bit encryption algorithm is in
compliance with RFC 3826. RFCs for SNMPv3 define two authentication hash algorithms, namely, HMAC-
MD5-96 and HMAC-SHA1-96. These are the full forms or editions of the truncated versions, namely,
HMAC-MD5 and HMAC-SHA1 authentication algorithms.
The Advanced Encryption Standard (AES) Cipher Feedback (CFB) 128-bit encryption algorithm is in
compliance with RFC 3826. RFCs for SNMPv3 define two authentication hash algorithms, namely, HMAC-
MD5-96 and HMAC-SHA1-96. These are the full forms or editions of the truncated versions, namely,
HMAC-MD5 and HMAC-SHA1 authentication algorithms.
Z4820T
Syntax
snmp-server user name {group_name remote ip-address udp-port
port-number} [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-
password] [priv {des56 | aes128–cfb} priv– password] [access
access-list-name | ipv6 access-list-name | access-list-name
ipv6 access-list-name]
To remove a user from the SNMP group, use the no snmp-server user name
{group_name remote ip-address udp-port port-number} [1 | 2c |
3] [encrypted] [auth {md5 | sha} auth-password] [priv {des56 |
aes128–cfb} priv-password] [access access-list-name | ipv6
access-list-name | access-list-name ipv6 access-list-name]
command.
port-number} [1 | 2c | 3] [encrypted] [auth {md5 | sha} auth-
password] [priv {des56 | aes128–cfb} priv– password] [access
access-list-name | ipv6 access-list-name | access-list-name
ipv6 access-list-name]
To remove a user from the SNMP group, use the no snmp-server user name
{group_name remote ip-address udp-port port-number} [1 | 2c |
3] [encrypted] [auth {md5 | sha} auth-password] [priv {des56 |
aes128–cfb} priv-password] [access access-list-name | ipv6
access-list-name | access-list-name ipv6 access-list-name]
command.
Parameters
auth-password
(OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the agent to receive packets from the
host and to send packets to the host. Minimum: eight
characters long.
password that enables the agent to receive packets from the
host and to send packets to the host. Minimum: eight
characters long.
aes128
(OPTIONAL) Enter the keyword aes128 to initiate the
AES128-CFB encryption algorithm for transmission of SNMP
packets.
AES128-CFB encryption algorithm for transmission of SNMP
packets.
priv-password
(OPTIONAL) Enter a text string (up to 20 characters long)
password that enables the host to encrypt the contents of
the message it sends to the agent and to decrypt the
contents of the message it receives from the agent.
Minimum: eight characters long.
password that enables the host to encrypt the contents of
the message it sends to the agent and to decrypt the
contents of the message it receives from the agent.
Minimum: eight characters long.
Defaults
If no authentication or privacy option is configured, then the messages are
exchanged (attempted anyway) without any authentication or encryption.
exchanged (attempted anyway) without any authentication or encryption.
Command
Modes
Modes
CONFIGURATION
Command
History
History
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.3(0.0)
Added support for the AES128-CFB encryption algorithm on
the S4820T, S4810, S6000 and Z-Series platforms
the S4820T, S4810, S6000 and Z-Series platforms
Simple Network Management Protocol (SNMP) and Syslog
1715