DELL 9.8(0.0) User Manual
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
supported in Programmable-Mux (PMUX) mode only.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
E-Series legacy
command
command
Related
Commands
Commands
setting.
— displays the logging setting and system messages in the internal
buffer.
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
To return to the default values, use the no logging facility command.
Parameters
facility-type
(OPTIONAL) Enter one of the following parameters:
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
Simple Network Management Protocol (SNMP) and Syslog
1727