DELL 9.8(0.0) User Manual
59
System Time and Date
The commands in this chapter configure time values on the system, either using the Dell Networking
operating software, or the hardware, or using the network time protocol (NTP). With NTP, the switch can
act only as a client to an NTP clock host.
For more information, refer to the “Network Time Protocol” section of the Management chapter in the
Dell Networking OS Configuration Guide.
operating software, or the hardware, or using the network time protocol (NTP). With NTP, the switch can
act only as a client to an NTP clock host.
For more information, refer to the “Network Time Protocol” section of the Management chapter in the
Dell Networking OS Configuration Guide.
The commands in this chapter are generally supported on Dell Networking OS with some exceptions, as
notes in the Command History fields.
notes in the Command History fields.
clock summer-time date
Set a date (and time zone) on which to convert the switch to daylight saving time on a one-time basis.
Syntax
clock summer-time time-zone date start-month start-day start-
year start-time end-month end-day end-year end-time [offset]
To delete a daylight saving time zone configuration, use the no clock summer-
time command.
year start-time end-month end-day end-year end-time [offset]
To delete a daylight saving time zone configuration, use the no clock summer-
time command.
Parameters
time-zone
Enter the three-letter name for the time zone. This name is
displayed in the show clock output.
displayed in the show clock output.
start-month
Enter the name of one of the 12 months in English. You can
enter the name of a day to change the order of the display to
time day month year.
enter the name of a day to change the order of the display to
time day month year.
start-day
Enter the number of the day. The range is from 1 to 31. You
can enter the name of a month to change the order of the
display to time day month year.
can enter the name of a month to change the order of the
display to time day month year.
start-year
Enter a four-digit number as the year. The range is from 1993
to 2035.
to 2035.
start-time
Enter the time in hours:minutes. For the hour variable, use
the 24-hour format; example, 17:15 is 5:15 pm.
the 24-hour format; example, 17:15 is 5:15 pm.
end-day
Enter the number of the day. The range is from 1 to 31. You
can enter the name of a month to change the order of the
display to time day month year.
can enter the name of a month to change the order of the
display to time day month year.
1784
System Time and Date