DELL 9.8(0.0) User Manual
Parameters
timezone-
name
name
Enter the name of the timezone. You cannot use spaces.
offset
Enter one of the following:
• a number from 1 to 23 as the number of hours in addition
to universal time coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the
number of hours.
Defaults
Not configured.
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.1.1.0
Introduced on the E-Series.
Usage
Information
Information
Coordinated universal time (UTC) is the time standard based on the International
Atomic Time standard, commonly known as Greenwich Mean time. When
determining system time, include the differentiator between UTC and your local
timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of
-8.
Atomic Time standard, commonly known as Greenwich Mean time. When
determining system time, include the differentiator between UTC and your local
timezone. For example, San Jose, CA is the Pacific Timezone with a UTC offset of
-8.
debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
Syntax
debug ntp {adjust | all | authentication | events | loopfilter
| packets | select | sync}
| packets | select | sync}
1788
System Time and Date