DELL 9.8(0.0) User Manual
downstream disable links
Configure the number of downstream links in the uplink-state group that are disabled if one upstream
link in an uplink-state group goes down.
link in an uplink-state group goes down.
Syntax
downstream disable links {number |all}
To revert to the default setting, use the no downstream disable links
command.
To revert to the default setting, use the no downstream disable links
command.
Parameters
number
Enter the number of downstream links to be brought down
by UFD. The range is from 1 to 1024.
by UFD. The range is from 1 to 1024.
all
Brings down all downstream links in the group.
Defaults
No downstream links are disabled when an upstream link in an uplink-state group
goes down.
goes down.
Command
Modes
Modes
UPLINK-STATE-GROUP
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
supported in Programmable-Mux (PMUX) mode only.
8.3.19.0
Introduced on the S4820T.
8.3.12.0
Introduced on the S4810.
8.4.2.3
Introduced on the S-Series S50.
Usage
Information
Information
A user-configurable number of downstream interfaces in an uplink-state group are
put into a link-down state with an UFD-Disabled error message when one
upstream interface in an uplink-state group goes down.
put into a link-down state with an UFD-Disabled error message when one
upstream interface in an uplink-state group goes down.
If all upstream interfaces in an uplink-state group go down, all downstream
interfaces in the same uplink-state group are put into a link-down state.
interfaces in the same uplink-state group are put into a link-down state.
Related
Commands
Commands
•
— assigns a port or port-channel to the uplink-state group as a
downstream interface.
•
upstream links.
Uplink Failure Detection (UFD)
1823