DELL 9.8(0.0) User Manual
creating a management VRF. For other types of VRFs, VRF ID is an optional
parameter. All values in the valid range that are not already taken are allowed.
parameter. All values in the valid range that are not already taken are allowed.
ip http vrf
Configures an HTTP client with a VRF that is used to connect to the HTTP server.
S4820T
Syntax
ip http vrf {management | vrf-name}
To undo the HTTP client configuration, use the ip http vrf command.
To undo the HTTP client configuration, use the ip http vrf command.
Parameters
management
Enter the keyword management for configuring the
management VRF that uses an HTTP client.
management VRF that uses an HTTP client.
vrf-name
Enter the name of the VRF for configuring a nondefault that
uses an HTTP client.
uses an HTTP client.
Defaults
Disabled
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.8(0.0)
Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, and Z9500.
ON, and Z9500.
Usage
Information
Information
To make the HTTP clients VRF-aware, use the ip http vrf command. The HTTP
client uses the VRF name that you specify to reach the HTTP server. If you do not
specify a VRF name, then the HTTP client uses the default VRF.
client uses the VRF name that you specify to reach the HTTP server. If you do not
specify a VRF name, then the HTTP client uses the default VRF.
description
Enables you to specify a descriptive name for a customer VRF.
Syntax
description string
Virtual Routing and Forwarding (VRF)
1873