DELL 9.8(0.0) User Manual
Line Beginning
with
with
Description
• UP or DOWN state of the tracked interface or object (Up
or Dn).
• Interface type and slot/port or object number,
description, and time since the last change in the state of
the tracked object.
• Cost to be subtracted from the VRRP group priority if the
state of the tracked interface/object goes DOWN.
Example
Dell#show vrrp ipv6
------------------
TenGigabitEthernet 5/6, IPv6 VRID: 255, Version: 3, Net:
fe80::201:e8ff:fe7a:6bb9
VRF: 0 default-vrf
State: Master, Priority: 101, Master: fe80::201:e8ff:fe7a:6bb9
(local)
Hold Down: 0 centisec, Preempt: TRUE, AdvInt: 100 centisec
Accept Mode: FALSE, Master AdvInt: 100 centisec
Adv rcvd: 0, Bad pkts rcvd: 0, Adv sent: 64
Virtual MAC address:
00:00:5e:00:02:ff
Virtual IP address:
1::255 fe80::255
vrrp-ipv6-group
Assign an interface to a VRRP group.
Syntax
vrrp-ipv6-group vrid
Parameters
vrid
Enter the virtual-router ID number of the VRRP group. The
VRID range is from 1 to 255.
VRID range is from 1 to 255.
Defaults
Not configured.
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
8.4.2.1
The range of valid VRID values on the E-Series when VRF
microcode is loaded in CAM changed from 1 to 15.
microcode is loaded in CAM changed from 1 to 15.
8.4.1.0
Introduced on the E-Series ExaScale, C-Series, and S-Series.
Virtual Router Redundancy Protocol (VRRP)
1909