DELL 9.8(0.0) User Manual
ip control-plane egress-filter
Enable egress Layer 3 ACL lookup for IPv4 CPU traffic.
Syntax
ip control-plane egress-filter
Defaults
Not enabled.
Command
Modes
Modes
EXEC Privilege
Command
History
History
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
show ip accounting access-list
Display the IP access-lists created on the switch and the sequence of filters.
Syntax
show ip accounting {access-list access-list-name | cam_count}
interface interface [vrf vrf-name]
interface interface [vrf vrf-name]
Parameters
access-list-
name
name
Enter the name of the ACL to be displayed.
cam_count
List the count of the CAM rules for this ACL.
interface
interface
interface
Enter the keyword interface then the one of the following
keywords and slot/port or number information:
keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
in | out
Identify whether ACL is applied on the ingress or egress side.
vrf vrf-name
(Optional) Enter the keyword vrf and then the name of the
VRF to view the IP accounting information on either a default
or a non-default VRF.
VRF to view the IP accounting information on either a default
or a non-default VRF.
228
Access Control Lists (ACL)