DELL 9.8(0.0) User Manual
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax
show cam-acl-vlan
Command
Modes
Modes
EXEC Privilege
Command
History
History
Version 9.3.
(0.0)
(0.0)
Introduced on the S4810, S4820T, Z9000 and MXL
platforms.
platforms.
Usage
Information
Information
After CAM configuration for ACL VLAN groups is performed, you must reboot the
system to enable the settings to be stored in nonvolatile storage. During the
initialization of CAM, the chassis manager reads the NVRAM and allocates the
dynamic VCAP regions.
system to enable the settings to be stored in nonvolatile storage. During the
initialization of CAM, the chassis manager reads the NVRAM and allocates the
dynamic VCAP regions.
The following table describes the output fields of this show command:
Field
Description
Chassis Vlan Cam ACL
Details about the CAM blocks allocated
for ACLs for various VLAN operations at
a system-wide, global level.
for ACLs for various VLAN operations at
a system-wide, global level.
Stack Unit <number>
Details about the CAM blocks allocated
for ACLs for various VLAN operations
for a particular stack unit.
for ACLs for various VLAN operations
for a particular stack unit.
Current Settings(in block sizes)
Information about the number of FP
blocks that are currently in use or
allocated.
blocks that are currently in use or
allocated.
VlanOpenFlow
Number of FP blocks for VLAN open
flow operations.
flow operations.
VlanIscsi
Number of FP blocks for VLAN internet
small computer system interface
(iSCSI) counters.
small computer system interface
(iSCSI) counters.
VlanHp
Number of FP blocks for VLAN high
performance processes.
performance processes.
VlanFcoe
Number of FP blocks for VLAN Fiber
Channel over Ethernet (FCoE)
operations.
Channel over Ethernet (FCoE)
operations.
376
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)