DELL 9.8(0.0) User Manual
Related
Commands
Commands
— configures a confederation ID.
— enables 4-byte support for the BGP process.
bgp dampening
Enable BGP route dampening and configure the dampening parameters.
S4820T
Syntax
bgp dampening [half-life reuse suppress max-suppress-time]
[route-map map-name]
To disable route dampening, use the no bgp dampening [half-life reuse
suppress max-suppress-time] [route-map map-name] command.
[route-map map-name]
To disable route dampening, use the no bgp dampening [half-life reuse
suppress max-suppress-time] [route-map map-name] command.
Parameters
half-life
(OPTIONAL) Enter the number of minutes after which the
Penalty is decreased. After the router assigns a Penalty of
1024 to a route, the Penalty is decreased by half after the
half-life period expires. The range is from 1 to 45. The default
is 15 minutes.
Penalty is decreased. After the router assigns a Penalty of
1024 to a route, the Penalty is decreased by half after the
half-life period expires. The range is from 1 to 45. The default
is 15 minutes.
reuse
(OPTIONAL) Enter a number as the reuse value, which is
compared to the flapping route’s Penalty value. If the Penalty
value is less than the reuse value, the flapping route is once
again advertised (or no longer suppressed). The range is from
1 to 20000. The default is 750.
compared to the flapping route’s Penalty value. If the Penalty
value is less than the reuse value, the flapping route is once
again advertised (or no longer suppressed). The range is from
1 to 20000. The default is 750.
suppress
(OPTIONAL) Enter a number as the suppress value, which is
compared to the flapping route’s Penalty value. If the Penalty
value is greater than the suppress value, the flapping route is
no longer advertised (that is, it is suppressed). The range is
from 1 to 20000. The default is 2000.
compared to the flapping route’s Penalty value. If the Penalty
value is greater than the suppress value, the flapping route is
no longer advertised (that is, it is suppressed). The range is
from 1 to 20000. The default is 2000.
max-suppress-
time
time
(OPTIONAL) Enter the maximum number of minutes a route
can be suppressed. The default is four times the half-life
value. The range is from 1 to 255. The default is 60 minutes.
can be suppressed. The default is four times the half-life
value. The range is from 1 to 255. The default is 60 minutes.
route-map
map-name
map-name
(OPTIONAL) Enter the keyword route-map then the name
of a configured route map.
of a configured route map.
Only match commands in the configured route map are
supported.
supported.
Defaults
Disabled.
Command
Modes
Modes
• ROUTER BGP
• ROUTER BGP-address-family
• ROUTER BGP-address-family
416
Border Gateway Protocol