DELL 9.8(0.0) User Manual

Version

Description

8.3.11.1

Introduced on the Z9000.

8.3.7.0

Introduced on the S4810.

7.8.1.0

Introduced on the S-Series.

7.7.1.0

Introduced on the C-Series.

Usage 
Information

If you enter the clear ip bgp flap-statistics command without any 
parameters, all statistics are cleared.

Related 
Commands

 — views the enabled debugging operations.

 — disables all debugging operations.

clear ip bgp peer-group

Reset a peer-group’s BGP sessions.

S4820T 

Syntax

clear ip bgp [vrf vrf-name] peer-group peer-group-name [ipv4 
[multicast | unicast] | ipv6 unicast] [soft {in | out}]

Parameters

vrf vrf-name

Enter the keyword vrf and then the name of the VRF to 
reset the peer group corresponding to that VRF.

NOTE: You can use this attribute on a specific VRF to 
remove history routes corresponding to that VRF. You 
can also use this attribute to return the suppressed 
routes corresponding to a specific VRF to an active state.

Enter the peer group name to reset the BGP sessions within 
that peer group.

ipv4 multicast

(OPTIONAL) Enter the keyword ipv4 followed by the 
keyword multicast to reset ipv4 multicast routes.

ipv4 unicast

(OPTIONAL) Enter the keyword ipv4 followed by the 
keyword unicast to reset ipv4 unicast routes.

ipv6 unicast

(OPTIONAL) Enter the keyword ipv6 followed by the 
keyword unicast to reset ipv6 unicast routes.

soft

(OPTIONAL) Enter the keyword soft to reset soft 
configuration.

in

Enter the keyword in to re-configure soft inbound updates.

out

Enter the keyword out to re-configure soft outbound 
updates.

432

Border Gateway Protocol