DELL 9.8(0.0) User Manual
neighbor distribute-list
Distribute BGP information via an established prefix list.
S4820T
Syntax
neighbor {ip-address | peer-group-name} distribute-list prefix-
list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ip-address |
peer-group-name} distribute-list prefix-list-name {in | out}
command.
list-name {in | out}
To delete a neighbor distribution list, use the no neighbor {ip-address |
peer-group-name} distribute-list prefix-list-name {in | out}
command.
Parameters
ip-address
Enter the IP address of the neighbor in dotted decimal
format.
format.
peer-group-
name
name
Enter the name of the peer group to apply the distribute list
filter to all routers in the peer group.
filter to all routers in the peer group.
prefix-list-
name
name
Enter the name of an established prefix list.
If the prefix list is not configured, the default is permit (to
allow all routes).
allow all routes).
in
Enter the keyword in to distribute only inbound traffic.
out
Enter the keyword out to distribute only outbound traffic.
Defaults
Not configured.
Command
Modes
Modes
ROUTER BGP
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
452
Border Gateway Protocol