DELL 9.8(0.0) User Manual
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
Information
If you configure the neighbor maximum-prefix command and the neighbor
receives more prefixes than the neighbor maximum-prefix command
configuration allows, the neighbor goes down and the show ip bgp summary
command displays (prfxd) in the State/PfxRcd column for that neighbor. The
neighbor remains down until you enter the clear ip bgp command for the
neighbor or the peer group to which the neighbor belongs or you enter the
neighbor shutdown and neighbor no shutdown commands.
receives more prefixes than the neighbor maximum-prefix command
configuration allows, the neighbor goes down and the show ip bgp summary
command displays (prfxd) in the State/PfxRcd column for that neighbor. The
neighbor remains down until you enter the clear ip bgp command for the
neighbor or the peer group to which the neighbor belongs or you enter the
neighbor shutdown and neighbor no shutdown commands.
Related
Commands
Commands
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
S4820T
Syntax
neighbor {ip-address | peer-group-name} password [encryption-
type] password
To delete a password, use the no neighbor {ip-address | peer-group-
name} password command.
type] password
To delete a password, use the no neighbor {ip-address | peer-group-
name} password command.
Parameters
ip-address
Enter the IP address of the router to be included in the peer
group.
group.
peer-group-
name
name
Enter the name of a configured peer group.
encryption-
type
type
(OPTIONAL) Enter 7 as the encryption type for the password
entered. 7 means that the password is encrypted and hidden.
entered. 7 means that the password is encrypted and hidden.
Border Gateway Protocol
457