DELL 9.8(0.0) User Manual
Parameters
peer-group-
name
name
Enter a text string up to 16 characters long as the name of
the peer group.
the peer group.
Defaults
Not configured.
Command
Modes
Modes
ROUTER BGP
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
Usage
Information
Information
When you create a peer group, it is disabled (Shut mode).
Related
Commands
Commands
— assigns routers to a peer group.
— assigns a indirectly connected AS to a neighbor or peer
group.
neighbor peer-group passive
Enable passive peering on a BGP peer group, that is, the peer group does not send an OPEN message,
but responds to one.
S4820T
Syntax
neighbor peer-group-name peer-group passive [limit sessions]
To delete a passive peer-group, use the no neighbor peer-group-name
peer-group passive command.
To delete a passive peer-group, use the no neighbor peer-group-name
peer-group passive command.
Border Gateway Protocol
461