DELL 9.8(0.0) User Manual

All the show and debugs commands display the link band width extended-
community prefixed with DMZ-Link-bw along with other extended communities.
Dell#show ip bgp 3.3.3.0/24

BGP routing table entry for 3.3.3.0/24

Paths: (1 available, table Default-IP-Routing-Table.)

Not advertised to any peer

Received from :

 1.1.1.2 (3.3.3.1)   Best

  AS_PATH :

  Next-Hop : 1.1.1.2, Cost : 0

  Origin IGP, Metric  0, LocalPref  100, Weight  0, internal

 Extended Communities :

  DMZ-Link Bw: 2000 kbytes*

Related 
Commands

 — controls the number of network prefixes received.

show ip bgp cluster-list

View BGP neighbors in a specific cluster.

S4820T

Syntax

show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 
unicast] cluster-list [cluster-id]

Parameters

vrf vrf-name

(OPTIONAL) Enter the keyword vrf and then the name of 
the VRF to view cluster information of BGP neighbors 
corresponding to that VRF.

ipv4 multicast

(OPTIONAL) Enter the keywords ipv4 followed by the 
keyword multicast to view information related only to ipv4 
multicast routes.

ipv4 unicast

(OPTIONAL) Enter the keyword ipv4 followed by the 
keyword unicast to view information related only to ipv4 
multicast routes.

ipv6 unicast

(OPTIONAL) Enter the keyword ipv6 followed by the 
keyword unicast to view information related to only to the 
ipv6 unicast routes.

(OPTIONAL) Enter the cluster id in dotted decimal format. 
The range is 1 — 4294967295.

Command 
Modes

• EXEC
• EXEC Privilege

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

486

Border Gateway Protocol