Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. 9.8(0.0)
  5. User Manual

DELL 9.8(0.0) User Manual

Download
Page of 1910
Command 
Modes
ROUTER BGP
Command 
History
This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 
8.3.19.0
Introduced on the S4820T.
Version 8.3.7.0
Introduced on the S4810.
Version 7.8.1.0
Introduced on the S-Series.
Version 7.7.1.0
Introduced on the C-Series.
Usage 
Information
CAUTION: Dell Networking recommends not changing the administrative 
distance of internal routes. Changing the administrative distances may cause 
routing table inconsistencies.
The higher the administrative distance assigned to a route means that your 
confidence in that route is low. Routes assigned an administrative distance of 255 
are not installed in the routing table. Routes from confederations are treated as 
internal BGP routes.
Related 
Commands
show ip bgp dampened-paths
View BGP routes that are dampened (non-active).
S4820T
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 
unicast] dampened-paths
Parameters
vrf vrf-name
(OPTIONAL) Enter the keywords vrf and then the name of 
the VRF to view routes that are affected by a specific 
community list corresponding to that VRF.
ipv4 multicast 
(OPTIONAL) Enter the keyword ipv4 followed by the 
keyword multicast to view information related only to ipv4 
multicast routes.
ipv4 unicast 
(OPTIONAL) Enter the keywords ipv4 followed by the 
keyword unicast to view information related only to ipv4 
unicast routes.
526
Border Gateway Protocol