DELL 9.8(0.0) User Manual
show feature
Verify the status of software applications, such as VRF, that are activated and running on a device.
S4820T
Syntax
show feature
Command
Modes
Modes
EXEC
EXEC Privilege
Command
History
History
Version 9.4(0.0)
Introduced on the S4810, S4820T, and S6000.
Usage
Information
Information
You can activate VRF application on a device by using the feature vrf command
in CONFIGURATION mode. The no feature vrf command is not supported on
any of the platforms.
in CONFIGURATION mode. The no feature vrf command is not supported on
any of the platforms.
Example
Dell#show feature
Feature State
------------------------------
VRF enabled
Command Modes
To navigate and launch various CLI modes, use specific commands. Navigation to these modes is
described in the following sections.
BGP ADDRESS-FAMILY Mode
To enable or configure IPv4 for BGP, use BGP ADDRESS-FAMILY mode. For more information, refer to
To enable or configure IPv6 for BGP, use BGP ADDRESS-FAMILY mode.
To enter BGP ADDRESS-FAMILY mode:
1.
Verify that you are logged in to ROUTER BGP mode.
2.
Enter the command address-family
3.
Enter the protocol type.
• For IPv4, enter ipv4 multicast. The prompt changes to include (conf-router_bgp_af) for IPv4.
• For IPv6, enteripv6 unicast. The prompt changes to include (conf-router_bgpv6_af) for IPv6.
• For IPv6, enteripv6 unicast. The prompt changes to include (conf-router_bgpv6_af) for IPv6.
CLASS-MAP Mode
CLI Basics
53