DELL 9.8(0.0) User Manual
Version
Description
8.4.1.0
Added support for IPv4 multicast and IPv6 unicast routes.
7.8.1.0
Introduced on the S4810.
7.7.1.0
Introduced on the C-Series.
7.2.1.0
Introduced on the E-Series TeraScale.
Usage
Information
Information
This command turns on BGP soft-reconfiguration inbound debugging for IPv6
unicast routes. If no neighbor is specified, debug is turned on for all neighbors.
unicast routes. If no neighbor is specified, debug is turned on for all neighbors.
ipv6 prefix-list
Configure an IPv6 prefix list.
S4820T
Syntax
ipv6 prefix-list prefix-list name
Parameters
prefix-list name
Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list
names.
names.
Defaults
none
Command
Modes
Modes
CONFIGURATION
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant FTOS Command Line Reference Guide.
refer to the relevant FTOS Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
Version
Description
9.0.0.0
Introduced on the Z9000.
8.3.19.0
Introduced on the S4820T.
8.3.10.0
Introduced on the S4810.
neighbor soft-reconfiguration inbound
Enable a BGP soft-reconfiguration and start storing updates for inbound IPv6 unicast routes.
S4820T
Syntax
neighbor {ipv4-address | ipv6-address | peer-group-name} soft-
reconfiguration inbound
reconfiguration inbound
536
Border Gateway Protocol