DELL 9.8(0.0) User Manual

cam-acl (Configuration)

Select the default CAM allocation settings or reconfigure a new CAM allocation for Layer 2, IPv4, and IPv6 
ACLs, Layer 2 and Layer 3 (IPv4) QoS, Layer 2 Protocol Tunneling (L2PT), IP and MAC source address 
validation for DHCP, Ethernet Connectivity Fault Management (CFM) ACLs, OpenFlow, and Policy-based 
Routing (PBR).

S4820T

Syntax

cam-acl {default | l2acl number ipv4acl number ipv6acl number 
ipv4qos number l2qos number l2pt number ipmacacl number [vman-
qos | vman-dual-qos number] ecfmacl number [nlbclusteracl 
number] ipv4pbr number }openflow number | fcoe number} 
[iscsioptacl number] [vrfv4acl number]

Parameters

default

Use the default CAM profile settings and set the CAM as 
follows:

• L2Acl : 6
• IPV4Acl : 4
• IPV6Acl : 0
• IPV4Qos : 2
• L2Qos : 1
• L2PT : 0
• IpMacAcl : 0
• VmanQos : 0
• VmanDualQos : 0
• EcfmAcl : 0
• nlbclusteracl: 0
• FcoeAcl : 0
• iscsiOptAcl : 0
• ipv4pbr : 0
• vrfv4Acl :0
• Openflow : 0
• fedgovacl : 0

l2acl number

Enter the keyword l2acl and then the number of l2acl 
blocks. The range is from 1 to 8.

ipv4acl number

Enter the keyword ipv4acl and then the number of FP 
blocks for IPv4. The range is from 0 to 8.

ipv6acl number

Enter the keyword ipv6acl and then the number of FP 
blocks for IPv6. The range is from 0 to 4.

ipv4qos 
number

Enter the keyword ipv4qos and then the number of FP 
blocks for IPv4. The range is from 0 to 8.

540

Content Addressable Memory (CAM)