DELL 9.8(0.0) User Manual
Version
Description
9.4(0.0)
Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
Information
All the default catch-all entries in the longest prefix match (LPM) table collect and
transmit all unresolved IPv6 packets to the CPU, even if they are destined for
unknown destinations.
transmit all unresolved IPv6 packets to the CPU, even if they are destined for
unknown destinations.
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
S4820T
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name
Enter the service-policy name, using a string up to 32
characters.
characters.
Defaults
Not configured.
Command
Modes
Modes
CONTROL-PLANE-CPUQOS
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.8.0
Introduced on the S4810.
Usage
Information
Information
Create a policy-map by associating a queue number with the qos-policy.
Create QoS policies prior to enabling this command.
For CoPP, use the keyword cpu-qos when creating qos-policy-input.
Related
Commands
Commands
— creates a QoS input policy map.
552
Control Plane Policing (CoPP)