DELL 9.8(0.0) User Manual
online stack-unit
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
number
Enter the stack-unit number. The S4820T range is from 0 to
11.
11.
Defaults
none
Command
Modes
Modes
EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4810.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.7.1.0
Introduced on the S-Series.
Usage
Information
Information
You cannot enter this command on a Master or Standby unit.
The system reboots when the off-line diagnostics complete. This reboot is an
automatic process. A warning message appears when the offline stack-unit
command is implemented.
automatic process. A warning message appears when the offline stack-unit
command is implemented.
Warning - Diagnostic execution will cause stack-unit to reboot
after completion of diags.
after completion of diags.
Proceed with Offline-Diags [confirm yes/no]:y
Related
Commands
Commands
example, temperature, voltage).
616
Debugging and Diagnostics