DELL 9.8(0.0) User Manual
Version
Description
8.3.11.0
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
Usage
Information
Information
This command enables a hardware watchdog mechanism that automatically
reboots an Dell Networking OS switch/ router with a single unresponsive unit. This
behavior is a last-resort mechanism intended to prevent a manual power cycle.
reboots an Dell Networking OS switch/ router with a single unresponsive unit. This
behavior is a last-resort mechanism intended to prevent a manual power cycle.
show hardware layer2
Display Layer 2 ACL or eg data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer2 {eg-acl | in-acl} stack-unit id port-set
0–0
0–0
Parameters
eg-acl | in-acl
Enter either the keyword eg-acl or the keyword in-acl to
select between ingress or egress ACL data.
select between ingress or egress ACL data.
stack-unit id
Enter the keyword stack-unit to select a stack ID. The
range is from 0 to 11.
range is from 0 to 11.
port-set 0–0
Enter the keywords port-set with a port-pipe number. .
The range is from 0 to 0.
The range is from 0 to 0.
Defaults
none
Command
Modes
Modes
EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
Usage
Information
Information
The unit numbers given are internal port numbers.
620
Debugging and Diagnostics