DELL 9.8(0.0) User Manual
3
File Management
This chapter contains command line interface (CLI) commands needed to manage the configuration files
as well as other file management commands.
as well as other file management commands.
boot system
Tell the system where to access the Dell Networking OS image used to boot the system.
Syntax
boot system {gateway ip address| stack-unit [{stack-unit-number
| all] [default | primary {system {A: | B: | bmp-boot} | tftp:
| | secondary]}
To return to the default boot sequence, use the no boot system command.
| all] [default | primary {system {A: | B: | bmp-boot} | tftp:
| | secondary]}
To return to the default boot sequence, use the no boot system command.
Parameters
gateway
Enter the IP address of the default next-hop gateway for the
management subnet.
management subnet.
ip-address
Enter an IP address in dotted decimal format.
stack-unit
Enter the stack-unit number for the master switch.
stack-unit-
number
number
Enter the stack-unit number. The range is from 0 to 11. .
default
Enter the keyword default to use the primary Dell
Networking OS image.
Networking OS image.
primary
Enter the keyword primary to use the primary Dell
Networking OS image.
Networking OS image.
secondary
Enter the keyword secondary to use the primary Dell
Networking OS image.
Networking OS image.
nfsmount
Enter the keyword nfsmount: to retrieve the image from a
mounted NFS file system. nfsmount://filepath
mounted NFS file system. nfsmount://filepath
system:
Enter the keyword system: to retrieve the image from the
system.
system.
tftp:
Enter the keyword TFTP: to retrieve the image from a TFTP
server. tftp://hostip/filepath.
server. tftp://hostip/filepath.
A: | B:
Enter A: or B: to boot one of the system partitions.
64
File Management