DELL 9.8(0.0) User Manual

Parameters

vrf vrf-name

(Optional) Enter the key word vrf and then the name of the 
VRF to add a domain name to the DNS list corresponding to 
that VRF.

Enter the name of the domain to be appended to the DNS 
list corresponding to the VRF.

Defaults

None

Command 
Modes

EXEC

Command 
History

This guide is platform-specific. For command information about other platforms, 
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000-ON.

9.4.(0.0)

Introduced on the S-Series and Z-Series.

Usage 
Information

Use this command to add domain names to the DNS lists corresponding to a 
specific VRF. You can add up to a maximum of six domain names to the DNS list 
corresponding to a VRF. This domain is used to complete the unqualified host 
names.

Example

Dell(conf)#ip domain-list  vrf jay dell.com 

Dell(conf)#ip domain-list  vrf jay force10.com

ip host

Configures a mapping between the host name server and the IP address for a specific VRF. This mapping 

information is used by the name-to-IP address table to resolve host names.

S4820T

Syntax

ip host [vrf vrf-name] name ip-address 
To undo the host name server to IP address mapping for VRFs, use the no ip 
host [vrf vrf-name] name ip-address command.

Parameters

vrf vrf-name

(Optional) Enter the key word vrf and then the name of the 
VRF to configure the name server to IP address mapping for 
that VRF.

Enter the name od the host to be associated with an IP 
address.

Enter the IP address of the name server in dotted decimal 
format.

680

Dynamic Host Configuration Protocol (DHCP)