DELL 9.8(0.0) User Manual
Version
Description
9.0.2.0
Introduced on the S6000.
9.0.0.0
Introduced on the Z9000.
8.3.10.0
Introduced on the S4810.
Usage
Information
Information
You must save the new ECMP settings to the startup-config (write-mem) then
reload the system for the new settings to take effect.
reload the system for the new settings to take effect.
Related
Commands
Commands
– Display content-addressable memory (CAM) entries for
an S-Series switch.
ip ecmp weighted
Enables weighted ECMP calculations.
Syntax
ip ecmp weighted
To disable weighted ECMP calculations, enter the no ip ecmp weighted
command.
To disable weighted ECMP calculations, enter the no ip ecmp weighted
command.
Defaults
N/A
Command
Modes
Modes
CONFIGURATION
Command
History
History
Version
Description
9.7(0.0)
Introduced on the S-Series.
Usage
Information
Information
Enabling this CLI would inform the FIB to re-program the destination prefix paths
with weights in the HW/CAM on the fly.
with weights in the HW/CAM on the fly.
If disabled, the CLI would inform the FIB to re-program the destination prefix paths
with no weights or regular ECMP.
with no weights or regular ECMP.
Example
Dell(conf)#ip ecmp ?
weighted Enables Weighted ECMP
Dell(conf)#ip ecmp weighted
Dell(conf)#do show running-config | grep ecmp
ip ecmp weighted
Dell(conf)#
Dell(conf)#no ip ecmp ?
weighted Disables Weighted ECMP
Dell(conf)#no ip ecmp weighted
Dell(conf)#do show running-config | grep ecmp
Equal Cost Multi-Path (ECMP)
691