DELL 9.8(0.0) User Manual
Defaults
Disabled
Command
Modes
Modes
CONFIGURATION (conf-frrp)
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Introduced on the S6000–ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Introduced on the C-Series.
7.4.1.0
Introduced.
interface
Configure the primary, secondary, and control-vlan interfaces.
S4820T
Syntax
interface {primary interface secondary interface control-vlan
vlan-id}
To return to the default, use the no interface {primary interface
secondary interface control-vlan vlan-id} command.
vlan-id}
To return to the default, use the no interface {primary interface
secondary interface control-vlan vlan-id} command.
Parameters
primary
interface
interface
Enter the keyword primary to configure the primary
interface then one of the following interfaces and slot/port
information:
interface then one of the following interfaces and slot/port
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
Force10 Resilient Ring Protocol (FRRP)
723