DELL 9.8(0.0) User Manual
Version
Description
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on C-Series, E-Series, and S-Series
Related
Commands
Commands
debug gvrp
Enable debugging on GVRP.
S4820T
Syntax
debug gvrp {config | events | pdu}
To disable debugging, use the no debug gvrp {config | events | pdu}
command.
To disable debugging, use the no debug gvrp {config | events | pdu}
command.
Parameters
config
Enter the keyword config to enable debugging on the
GVRP configuration.
GVRP configuration.
event
Enter the keyword event to enable debugging on the JOIN/
LEAVE events.
LEAVE events.
pdu
Enter the keyword pdu then one of the following Interface
keywords and slot/port or number information:
keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
Defaults
Disabled.
Command
Modes
Modes
EXEC
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
GARP VLAN Registration (GVRP)
733