DELL 9.8(0.0) User Manual
Parameters
2
Enter the number 2 to set the IGMP version number to
IGMPv2.
IGMPv2.
3
Enter the number 3 to set the IGMP version number to
IGMPv3.
IGMPv3.
Defaults
2 (that is, IGMPv2)
Command
Modes
Modes
INTERFACE
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
Description
9.7(0.0)
Changed the default IGMP from version 2 to version 3.
Introduced on the S6000-ON
Introduced on the S6000-ON
9.5(0.0)
Introduced on the Z9500.
9.0.2.0
Introduced on the S6000.
9.2(0.0)
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
supported in Programmable-Mux (PMUX) mode only.
8.3.19.0
Introduced on the S4820T.
8.3.11.1
Introduced on the Z9000.
8.3.7.0
Introduced on the S4810.
7.8.1.0
Introduced on the S-Series.
7.7.1.0
Introduced on the C-Series.
7.5.1.0
Introduced on the E-Series.
show ip igmp groups
View the IGMP groups.
S4820T
Syntax
show ip igmp [vrf vrf-name] groups [group-address [detail] |
detail | interface [group-address [detail]]]
detail | interface [group-address [detail]]]
Parameters
vrf vrf-name
(OPTIONAL) Enter the keyword vrf followed by the name of
the VRF to configure this setting on that VRF.
the VRF to configure this setting on that VRF.
group-address
(OPTIONAL) Enter the group address in dotted decimal
format to view information on that group only.
format to view information on that group only.
Internet Group Management Protocol (IGMP)
771