DELL 9.8(0.0) User Manual

Parameters

snooping

Enter the keyword snooping to enable debugging of IGMP
snooping.

group-address

(OPTIONAL) Enter the IP multicast group address in dotted
decimal format.

interface
interface

Enter the following keywords and slot/port or number
information:

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

• For a port channel interface, enter the keywords port-

channel then a number.

Defaults

Disabled.

Command
Modes

EXEC Privilege

Command
History

This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, and Z9500.

Usage
Information

IGMP commands accept only non-VLAN interfaces — specifying VLAN does not
yield results. This command displays packets for IGMP and IGMP snooping.

ip igmp snooping enable

Enable IGMP snooping on all or a single VLAN. This command is the master on/off switch to enable IGMP

snooping.

Syntax

ip igmp snooping enable
To disable IGMP snooping, use the no ip igmp snooping enable command.