DELL 9.8(0.0) User Manual
Version
Description
8.3.7.0
Introduced on the S4810.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
pre-6.2.1.1
Introduced on the E-Series.
debug arp
View information on ARP transactions.
S4820T
Syntax
debug arp [interface] [count value]
To stop debugging ARP transactions, use the no debug arp command.
To stop debugging ARP transactions, use the no debug arp command.
Parameters
interface
(OPTIONAL) Enter the following keywords and slot/port or
number information:
number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For the Management interface on the stack-unit, enter
the keyword ManagementEthernet then the slot/port
information. The slot range is from 0 to 1. The port range
is 0.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
count value
(OPTIONAL) Enter the keyword count then the count value.
The range is from 1 to 65534.
The range is from 1 to 65534.
Defaults
none
Command
Modes
Modes
EXEC Privilege
Command
History
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
902
IPv4 Routing