DELL 9.8(0.0) User Manual
Version
Description
8.3.11.1
Introduced on the Z9000.
8.5.1.0
Added support for 4-port 40G line cards on ExaScale.
8.3.7.0
Introduced on the S4810.
8.2.1.0
Added support for 4094 VLANs on the E-Series ExaScale
(the prior limit was 2094).
(the prior limit was 2094).
8.1.1.0
Introduced on the E-Series ExaScale.
7.6.1.0
Introduced on the S-Series.
7.5.1.0
Introduced on the C-Series.
6.3.1.0
Added the count option.
Example
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
ICMP: echo request rcvd from src 40.40.40.40
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply
ICMP: echo request sent to dst 40.40.40.40
Usage
Information
Information
To stop packets from flooding the user terminal when debugging is turned on, use
the count option.
the count option.
debug ip packet
View a log of IP packets sent and received.
S4820T
Syntax
debug ip packet [access-group name] [count value] [interface]
To disable debugging, use the no debug ip packet [access-group name]
[count value] [interface] command.
To disable debugging, use the no debug ip packet [access-group name]
[count value] [interface] command.
Parameters
access-group
name
name
Enter the keyword access-group then the access list name
(maximum 16 characters) to limit the debug output based on
the defined rules in the ACL.
(maximum 16 characters) to limit the debug output based on
the defined rules in the ACL.
count value
(OPTIONAL) Enter the keyword count then the count value.
The range is from 1 to 65534. The default is Infinity.
The range is from 1 to 65534. The default is Infinity.
interface
(OPTIONAL) Enter the following keywords and slot/port or
number information:
number information:
906
IPv4 Routing