DELL 9.8(0.0) User Manual
Version
Description
9.7(0.0)
Introduced on the S6000-ON.
9.0.2.0
Introduced on the S6000.
8.3.19.0
Introduced on the S4820T.
8.3.7.0
Introduced on the S4810.
8.4.2.1
Introduced on the S-Series.
8.2.1.0
Introduced on the E-Series ExaScale.
7.8.1.0
Introduced on the C-Series.
7.4.1.0
Introduced on the E-Series TeraScale. Added the monitor
option.
option.
permit
To configure a filter that matches the filter criteria, select an IPv6 protocol number, ICMP, IPv6, TCP, or
UDP.
Syntax
permit {ipv6-protocol-number | icmp | ipv6 | tcp | udp}
To remove this filter, you have two choices:
To remove this filter, you have two choices:
• Use the no seq sequence-number command syntax if you know the filter’s
sequence number
• Use the no permit {ipv6-protocol-number | icmp | ipv6 | tcp |
udp} command
Parameters
ip-protocol-
number
number
Enter an IPv6 protocol number. The range is from 0 to 255.
icmp
Enter the keyword icmp to filter internet Control Message
Protocol version 6.
Protocol version 6.
ipv6
Enter the keyword ipv6 to filter any internet Protocol
version 6.
version 6.
tcp
Enter the keyword tcp to filter the Transmission Control
protocol.
protocol.
udp
Enter the keyword udp to filter the User Datagram Protocol.
Defaults
Not configured.
Command
Modes
Modes
ACCESS-LIST
IPv6 Access Control Lists (IPv6 ACLs)
979