Nortel Networks NN47250-500 User Manual
646 Configuring communication with RADIUS
NN47250-500 (Version 03.01)
The command syntax is displayed below:
WSS# set usergroup groupname attr termination-action [0 | 1]
WSS# set user username attr termination-action [0 | 1]
MAC User range authentication
WLAN Management Software and MSS allows authentication of users based on the MAC address of a device. This
allows a set of MAC authenticated devices like VoIP phones to authenticate through a RADIUS server and through the
WSS local database without additional configuration.
allows a set of MAC authenticated devices like VoIP phones to authenticate through a RADIUS server and through the
WSS local database without additional configuration.
WLAN Management Software allows input such as 00:11:00:* instead of the entire MAC address. Only one * (asterisk)
is allowed in the address format and it must be the last character.
is allowed in the address format and it must be the last character.
Table 40. Dot1X Dynamic WEP Clients
Session Timeout (ST)
Configured (not 0)
0
Not set
Termination
Action (TA)
Action (TA)
0
Disconnect
Disconnect after
dot1x timer
dot1x timer
Disconnect after
dot1x timer
dot1x timer
1
Reauthenticate
Immediate
reauthentication
after connecting
reauthentication
after connecting
Reauthenticate
after dot1x timer
after dot1x timer
Not
set
set
Reauthenticate
Reauthenticate
after dot1x timer
after dot1x timer
Reauthenticate
after dot1x timer
after dot1x timer
Table 41. Non Dot1X and nondynamic WEP Dot1X Clients
Session Timeout (ST)
Configured (not 0)
0
Not set
Termination
Action (TA)
Action (TA)
0
Disconnect
Never disconnect
Never disconnect
1
Reauthenticate
Immediate
reauthentication
after connecting
reauthentication
after connecting
Never disconnect
Not
set
set
Disconnect if non
Dot1X client.
Reauthenticate if
Dot1X client.
Dot1X client.
Reauthenticate if
Dot1X client.
Never disconnect
Never disconnect