Raritan Computer DKX2-V2.3.5-0N-E User Manual

Appendix D: FAQs 
 

What is the extended local port? 

The Dominion KX2-832 and KX2-864 feature an extended local port.   
The KX II eight user models have a standard local port, plus a new 
extended local port that extends the local port, via Cat5 cable, beyond 
the rack to a control room, another point in the data center or to a 
Paragon II switch. 

Can I connect the extended local port to another KX II?   

Yes, you can connect the extended local port to a server port of another 
KX II using the "tiering" feature of the KX II. 

Is a user station required for the extended local port? 

Yes, the following devices can function as the "user station" for the 
extended local port: Paragon II EUST, Paragon II UST, and the Cat5 
Reach URKVMG device. In addition, the extended local port can be 
connected via Cat5 cable to a server port on a Paragon II switch. This 
configuration can be used to consolidate the local ports of many 
KX2-8xxx devices to a single switch. 

How far can the user station be from the KX II? 

The distance is 200' to 1000', but varies according to the type of user 
station, the video resolution, cable type and quality. 

Is a CIM required? 

No CIM is required.    Just connect a Cat5 cable. 

Must I use the extended local port? 

No, the extended local port is an optional feature and is disabled by 
default. Use the Local Port Settings page to enable it. You can also 
disable the standard local port if you are not going to use it for added 
security.