Raritan Computer 4.7 User Manual
Chapter 7: Operation - Administrator Functions
101
3. Turn ON the base tier (first tier).
4. Perform a partial reset of the database on impacted Paragon
switches. For example, if you swap the switches connected to
the base tier, perform the partial reset on the base tier. If you
swap the switches connected to the second tier, perform the
partial reset from the second tier to the base tier. For information
on partial reset, see
the base tier, perform the partial reset on the base tier. If you
swap the switches connected to the second tier, perform the
partial reset from the second tier to the base tier. For information
on partial reset, see
Reset Unit
(on page 44).
User stations can be turned ON and OFF at any time as needed.
System Configuration
To set certain global parameters, select option 1, System Configuration,
from the Administration Menu and press Enter.
from the Administration Menu and press Enter.
1. Press
the or Tab key to move the highlight forward, or the
or
Shift + Tab to move the highlight backward to a desired field. Press
Enter to edit the field. The highlighted area will turn green. Some
fields have character or numeric values you can type; others have
values you can toggle between with the arrow keys. When editing is
complete, either press Enter followed by S to save your changes, or
press Esc to abort the changes and continue using the previous
settings.
Enter to edit the field. The highlighted area will turn green. Some
fields have character or numeric values you can type; others have
values you can toggle between with the arrow keys. When editing is
complete, either press Enter followed by S to save your changes, or
press Esc to abort the changes and continue using the previous
settings.
Device ID: Type the desired name for the single Paragon switch
or Base Unit. It is important for Paragon switches in a “cascaded
system with multiple matrix switches” to have distinctive names,
so that users can tell them apart. (The system will assign each
switch the default name “Paragon <user ports><channel ports>”:
each P2-UMT242 will be named “Paragon 242, each
P2-UMT442 “Paragon 442,” and so on.)
system with multiple matrix switches” to have distinctive names,
so that users can tell them apart. (The system will assign each
switch the default name “Paragon <user ports><channel ports>”:
each P2-UMT242 will be named “Paragon 242, each
P2-UMT442 “Paragon 442,” and so on.)