Raritan Computer 4.7 User Manual

Chapter 1: How-To: Paragon Essentials 
 

Channel 
Configuration 

All settings or records of the active and inactive 
channels in the Channel Configuration submenu are 
cleared, but the data of active channels is rebuilt 
automatically after the reset 

4.  Now reset the selected items. Press O (alphabetical character) --> 

type yes --> press Enter. 

5.  The system will log out all of logged-in users and return the selected 

settings to factory defaults. 

See 

 (on page 120) for details. 

 

Purpose: To pass the login authentication configured in specific servers 
that require the input of the data stored in an appropriate smart card. 
This function requires the card reader-enabled firmware and devices, 
including the Paragon switch with firmware 4.3 or above, P2-EUST/C 
and P2CIM-AUSB-C. 

1.  Log in to the Paragon system utilizing a user station with an 

integrated card reader (P2-EUST/C). 

2.  Access the server where the appropriate authentication software and 

driver have been installed and configured properly and which is 
connected to the Paragon system via P2CIM-AUSB-C. 

3.  When you see the blank screen or a message prompting you to 

insert the card, insert your smart card into the card reader of the user 
station. 

4.  Depending on the configuration of the target server or authentication 

software, you may also need to enter a PIN. 

5.  After the login authentication and authorization has been completed, 

you can start working on the server. 

6.  When you complete your work, press the hot key (default: Scroll 

Lock) twice quickly to trigger the OSUI. 

See 

 (on page 36) for 

details. 

7. Press 

Shift +F9 to disconnect the server, and then remove the card. 

See 

 (on page 96) for details. 

The card's authentication data is not stored in the Paragon system so 
you must repeat Steps 3 to 5 if you want to access the same server 
again.