Raritan Computer 4.7 User Manual

 

Chapter 10: Configurations 

 

The following procedure must be followed to ensure this configuration 
functions properly. 

After re-connection, all Paragon switches must undergo a FUNC reset to 
clear the switches' database. See 

 (on page 44) for more 

information on clearing the database. This procedure should be 
performed starting from the third-tier device down to the Base Unit. 

 

Execute the FUNC reset in the following order: UMT-3 --> UMT-2 --> 
UMT-1. 

 

 

Single diamond configuration: 

A user configured on the second tier and connected to UMT-2A has 
access only to UMT-3A, while a user connected to UMT-2B can access 
both UMT-3A and UMT-3B. The Base Unit (UMT-1) administrator has 
access to all Paragon switches in the single diamond configuration. 

The following procedure must be followed to ensure this configuration 
functions properly. 

  After re-connection, all Paragon switches must undergo a FUNC 

reset to clear the switches' database. See 

 (on page 

44) for more information on clearing the database. This 
procedure should be performed starting from the third-tier device 
down to the Base Unit.