Raritan Computer 4.7 User Manual
Chapter 10: Configurations
161
Example B: Improper cable length difference:
P2-HubPac Configuration and Multiple Video
Read this section if performing the Multiple Video function in a Paragon II
system in which the P2-HubPac is installed.
system in which the P2-HubPac is installed.
Configuration for Multiple Video
In order to perform the Multiple Video function in a system involving the
P2-HubPac, each "switch port" of the same five-port cluster of the
P2-HubPac must be attached to a Paragon switch connected to a
DIFFERENT Base Unit.
P2-HubPac, each "switch port" of the same five-port cluster of the
P2-HubPac must be attached to a Paragon switch connected to a
DIFFERENT Base Unit.
In other words, the Paragon switches connected to the same cluster
cannot share the same Paragon Base Unit.
cannot share the same Paragon Base Unit.
This diagram indicates the four switch ports on a five-port cluster. The
switch ports are marked as x-1, x-2, x-3 and x-4 respectively (x
represents the cluster number).
switch ports are marked as x-1, x-2, x-3 and x-4 respectively (x
represents the cluster number).