Raritan Computer 4.7 User Manual

Chapter 3: Rackmount and Installation 
 

Front rackmount of a Paragon switch 

 

 

Front rackmount of a Paragon user station 

 

 

The steps correspond to the numbers shown in the rear rackmount 
diagrams. 

1.  Secure the cable-support bar to the front end of the side brackets, 

near the side brackets' “ears,” using two of the included screws. 

2.  Slide the user station or KVM switch between the side brackets, with 

its rear panel facing the cable-support bar, until its front panel is flush 
with the back edges of the side brackets. 

3.  Secure the user station or switch to the side brackets using the 

remaining included screws (three on each side). 

4.  Mount the entire assembly in your rack and secure the side brackets' 

ears to the rack's front rails with your own screws, bolts, cage nuts, 
and so on. 

5.  When connecting cables to the rear panel of the user station or 

switch, drape them over the cable-support bar.