Raritan Computer 4.7 User Manual

 

Chapter 3: Rackmount and Installation 

 

a. Press 

the 

FUNC button and use the 

 and    buttons to select 

"Set Stack ID." Press the ENT button to confirm the selection. 

b.  Assign the Stacking Unit ID using the 

 and   buttons. 

7. Press 

the 

ENT button to save the setting. 

8.  Turn OFF all Paragon switches. 

9.  Turn on the Stacking Unit. 

10.  Turn on the Main Unit. 

 

After completing the hardware installation of the Paragon system, 
whenever you want to turn off a Stacking Unit, you must disconnect 
it from the Main Unit before turning it off. This is because turning off 
the Stacking Unit when it remains connected to the Main Unit results in 
incorrect channel color display on the OSUI Selection Menu. If this 
occurs, follow this procedure to restore the color display to normal. 

 

1.  Remove the stacking cable connected between Stacking and Main 

Units. 

2.  Turn off the Main Unit. 

3.  Re-connect the stacking cable between Main and Stacking Units. 

4.  Turn on the Stacking Unit first. 

5.  Turn on the Main Unit. 

 

P2-HubPac is available for use with Paragon II. HubPac devices allow 
users of different Paragon switches to access the same server(s). Each 
five-port cluster on a HubPac is capable of connecting a server to up to 
four Paragon switches. 

CIM models capable of connecting to a P2-HubPac include: 

 

P2CIM-APS2 

 

P2CIM-AUSB 

 

P2CIM-ASUN 

 

UKVMC