Raritan Computer 4.7 User Manual

Chapter 4: Front Panel Display and Controls 
 

Press the ESC button on the front panel at any time to return to Normal 
Display. 

 

This function checks whether user stations (USTs) are functioning 
properly. 

 

1. Press 

the   or    button to change user port number. Display will 

read "OK", "None", or "Failed." 

  If a "Failed" condition is detected, make sure the Cat5 UTP cable 

is installed properly and secured, or try using another user 
station (UST) to see if the user station under test has become 
defective. 

2. Press 

the 

ESC button on the front panel at any time to return to 

Normal Display. 

 

This function checks whether a CIM is functioning properly. 

 

1. Press 

the   or    button to change channel number. Display will 

read "OK", "None", or "Failed." 

  If a "Failed" condition is detected, make sure the Cat5 UTP cable 

is installed properly and secured, or try using another CIM to see 
if the CIM under test has become defective. 

2. Press 

the 

ESC button on the front panel at any time to return to 

Normal Display. 

 

 

1. Press 

the   or    button to set the Stacking Unit ID number (0~3 

for a P2-UMT832M or 0~1 for a P2-UMT1664M). 

  The default is set to "0" (no Stacking Units connected). 

  If you wish to add Stacking Units, this number must be equal to 

the number of Stacking Units connected.