Raritan Computer 4.7 User Manual

Chapter 5: Information about Keyboard, Mouse and Video 
 

In some operating systems, the pipe key ( | ) on the 102-key keyboard 
cannot be recognized and is not displayed on the screen. To recognize 
this key, you should change the keyboard setting from 101-key to 
102-key type. This function is supported by P2CIM-APS2 with firmware 
version 3C0 or later. 

1.  Highlight the channel of the server where the pipe key is 

unrecognized, such as a Unix server. 

2.  Activate a text editor on the server. 

3. Press 

Left Ctrl + Delete to enter the setting mode. The following 

message appears in the text editor, indicating that you can change 
the keyboard setting now. The text “-now keyboard type-101key” 
means the current keyboard layout is 101-key version. 

 

4. Press 

c to change the keyboard type. 

5.  (Optional) You can press Left Ctrl + Delete again to verify whether 

the current keyboard setting is 102-key. If the message shows “now 
keyboard type-102key

”in the text editor, the current setting is 

102-key keyboard. 

 

6. Either 

press 

Esc to exit the setting mode or close the text editor. 

To reverse the keyboard type from 102 keys to 101 keys, simply repeat 
the above steps 1 through 4. 

 

With P2CIM-AUSB (with firmware version 0D0 or later) and the 
P2-UST/P2-EUST (or P2-EUST/C) user station, you can use two types 
of multi-button Kensington mouse: one is Expert Mouse, and the other is 
Turbo Mouse trackball. By default the CIM enables you to use a 3-button 
wheel mouse, and you must change the mouse setting in order to use 
more buttons on the Kensington mouse. 

1.  Highlight the channel of the desired server on the Selection Menu, 

and press Enter. 

2.  Activate a text editor, such as Notepad, on the server.